Condition: Used

Refer to pictures and description below for options installed and what is included.

Included in the sale:

• FTB-1 Pro Mainframe (FTB-1V2PRO-S1-128G)  
• RF • Built-in Wi-Fi and Bluetooth Capability
• FTB-880v2 NetBlazer Module
• Carry Bag
• Stylus
• 4x SFPs
• Power Adapter

Installed options:

GigE Optical / Electrical - Enables support for 1000 Base-X and 1000 Base-T

100 Optical Ethernet 100BASE-FX

10G LAN / WAN Enables EtherBERT, RFC2544 with Smart Loopback, EtherSAM (Y.1564)

SONET / SDH - Base software

52M Enables 52Mbit/s optical Rate Interface

The FTB-880v2/870v2 NetBlazer are the field technician’s go-to solution covering all things 10G. Fully loaded Ethernet testing includes iSAM and RFC 6349 with GigE and 10 GigE dual ports, as well as OTN, SONET/SDH, DSn/PDH, ISDN PRI, fiber-to-the-antenna (FTTA), Fibre Channel and packet synchronization.

The ongoing transition toward a converged network infrastructure for legacy DSn/PDH, ISDN, SONET/SDH, OTN and Fibre Channel, requires a test tool that can cover a wide range of interfaces and rates—without sacrificing portability, speed or cost.

Leveraging the powerful, intelligent FTB-1 Pro handheld platform, the NetBlazer V2 Series streamlines processes and empowers field technicians to test and validate DSn/PDH, ISDN, SONET/SDH, OTN, Fibre Channel, common public radio interface (CPRI) and packet-based high-speed Ethernet services efficiently.

FTB-880v2 NetBlazer(tests up to 10G)The FTB-880v2/870v2 NetBlazer are the field technician’s go-to solution covering all things 10G.Fully loaded Ethernet testing includes iSAM and RFC 6349 with GigE and 10 GigE dual ports, as well as OTN, SONET/SDH, DSn/PDH, ISDN PRI, fiber-to-the-antenna (FTTA), Fibre Channel and packet synchronization.

KEY FEATURES

Comprehensive testing for DSn/PDH, ISDN, SONET/SDH, OTN, Fibre Channel (1x-16x), CPRI and Ethernet interfaces up to 100 Gbit/siSAM intelligent service activation methodology, based on the ITU-T Y.1564 and RFC 6349 standards, simplifies and speeds up Ethernet service activationRFC-6349 testing: 10M-100G multisession TCP testing with bidirectional resultsPluggable CFP4 and QSFP28 optics to facilitate the testing of next-generation networks, and QSFP+ interface for 40GigEDual-port or quad-port testing up to 10G WAN and LAN, allows technicians to run up to four simultaneous testsFTTA/C-RAN validation from 1.2 Gbit/s to 9.8 Gbit/s via layer-2 CPRI protocol and unframed BER testingReal-time, high-resolution radio frequency (RF) spectrum analysis using digitized RF data (IQ data) in the CPRI linkCarrier Ethernet OAM testing covering the Y.1731, G.8113.1 (MPLS-TP), MEF and 802.1ag and IEEE 802.3ah Link OAM standardsEthernet service activation with EtherSAM (ITU-T Y.1564) service configuration and performance tests, complemented by Remote Discovery, Smart Loopback and Dual Test Set capabilitiesUltra-powerful processing backed by quad-core FTB platform with Windows 8.1 Professional operating system, providing access to many third-party apps and the ability to connect to a wide range of devices

BENEFITS

iSAM:Ultra-Simple Ethernet Service Activation Test Methodology (put time back on your side)iSAM, EXFO’s intelligent Ethernet service activation methodology brings simplicity to field testing.Based on the ITU-T Y.1564 and RFC 6349 standards, iSAM streamlines Ethernet testing with a one-page test configuration.Speed up Ethernet TestingWith iSAM, the focus is on performing Ethernet testing faster and simpler, making the Y.1564 and RFC 6349 standards as easy as possible for technicians at any skill level to use.A key component lending to iSAM’s simplicity is the reduced number of steps it actually takes to setup, run and receive a valid test result, thus delivering first-time-right results–every time.In addition to the simplicity it brings to the world of Ethernet testing, iSAM also includes the latest cutting-edge Metro Ethernet Forum (MEF) profiles.Using predefined performance metric profiles from MEF 23.1, field technicians can quickly select the MEF service type they need to test, and validate Ethernet services in a consistent and repeatable manner.Accelerate Time to RevenueiSAM was designed to help service providers and their technicians seamlessly transition from legacy testing methodologies to a simpler and more powerful Ethernet test methodology.By combining iSAM’s easy-to-use, cutting-edge capabilities with EXFO’s flexible licensing options, service providers have access to an Ethernet testing solution that will maximize testing efficiencies and greatly improve time to revenue.

For the manufacturer datasheet, please click here

Shipping & Returns Policy

Shipping Policy

• Processing Time: Orders are typically processed and dispatched within 1 business day.
• Shipping Methods: We offer Expedited Shipping to all destinations using UPS/DHL/Fedex/Royal Mail and other reputable carriers.
• Shipping Times: Mainland UK: 1-2 Business Days / Mainland Europe and USA: 2-3 Business Days / Rest of the World 5-7 Business Days.
• Shipping Costs: These are calculated at checkout based on the shipping method, destination and package dimensions.
• CUSTOMS AND TAXES: It is YOUR responsibility to liaise with customs in your country and ensure your package is cleared and any taxes are paid.
• Shipping Destinations: We ship worldwide.
• Tracking: Once your order is shipped, we will provide you with a tracking number via email.
• Insurance: All shipments are insured. In case of damage, please contact us via email within 48 hours of receiving the product with photographic evidence, please also ensure a report is logged with the delivery driver.

Returns Policy

• Return Period: In the event of an item being received which is 'not as specified', you can return your purchase within 14 days of delivery.
• Condition of Items: Items must be returned unused and in their original packaging.
• Return Method: All returns must be notified in writing to hello@ttinstruments.com, the email should accompany the order number, date and reason for return and must be within 14 days of delivery.
• Restocking Fees: A restocking fee of up-to 20% is applicable for items returned for any reason other than 'not as specified'.
• Refund Method: Refunds are processed to the original method of payment within 5 business days of receiving the return.
• Exchanges: We do not offer exchanges. It will either be a replacement or a refund.
• Return Shipping Costs: Return shipping costs will be borne by the customer unless the item is 'not as specified', in this case we will arrange for the return by way of a prepaid shipping label.